Configuring The Encoder Board; Figure 5-8 Video Analytics Tab; Figure 5-9 Video Analytics Message - Honeywell HNVE1 Reference Manual

Configuring the Encoder Board

Document 800-04195 Rev B
11/09
Figure 5-8 Video Analytics Tab
Note Select Disable in the appropriate field(s) (default setting) to turn off video
blur, camera blind, of field of view change detection.
Figure 5-9 Video Analytics Message
To clear the alarm message, click Reset Scene.
Use the Board Setup tab to configure the encoder board setting.
Note These board settings are applicable only to the PTZ dome that is connected
to the encoder.
HNVE1 V2.1 1-Channel Encoder Reference Guide
71