Encoder and Device Configuration
Configuring a PTZ Dome
62
The PTZ Dome Setup Tab provides access to the settings used to configure the PTZ
functions. The selections made in the Board Setup tab determine which settings are
available. See
Table 5-1
for the settings available for each PTZ Dome protocol.
Table 5-1
PTZ Dome Settings Based on Protocol Selections
Protocol
Preset
Details
Pelco P
Yes
Pelco D
Yes
Diamond
Yes
TM
IntelliBus
Yes
VCL
No
MAXPRO-Net
No
Figure 5-3
shows the options available for the Diamond and IntelliBus
Figure 5-3
PTZ Dome Setup View
Mimic
Preset
Tour
Tour
Details
Details
No
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
Program presets, mimic tours,
and preset tours.
The camera menu is available
only for IntelliBus or Diamond
camera protocols. See
Opening and Displaying the
Camera Menu
on page 67.
Camera
Menu
No
No
Yes
Yes
No
No
TM
protocols.
The PTZ control provides
the same functionality as a
traditional keyboard/joystick
controller.