Encoder Installation
22
Figure 2-5
Alarm Output Connection
I- O- D-
ALARM
–
+
I+ O+D+
The alarm output can be configured to provide normally open or normally closed contacts
(see
Programming Alarm Contacts
be rated for 12 VDC @ 0.5 A.
Connecting PTZ Domes
Figure 2-6
PTZ Dome Connections
I- O- D-
I+ O+ D+
Connecting Power
Caution
When connecting a power supply, use the provided 12 VDC Power
power plug or use a PoE IEEE 802.3af (Power over Ethernet)
compatible hub. To avoid damage to the HNVE1, never connect more
than one type of power supply at the same time.
on page
59
to configure the alarm output). Contacts will