Launching The Web-Client From Ip Utility - Honeywell HNVE1 Reference Manual

Before You Begin Configuring

Launching the Web-Client from IP Utility

42
Note The web page where you log on to the Honeywell IP Utility and any IP device
web page (for example, the HNVE1 Web-Client) look very similar. You can tell
the difference between the two sites by the IP address in the web browser as
well as the program name in the lower left corner of the window.
To log on to the Web-Client:
1. From the desktop, double-click the Honeywell IP Utility icon
OR
➤
Click Start All Programs
➤
Utility Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
2. From the User Name drop-down list, select Administrator or Guest.
3. In the Password field, type in the case-sensitive password.
• The default Administrator password is 1234.
Only one Administrator can be logged on at a time.
• The default Guest password is guest.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
OR
Select the device and click
The network settings for the connected device are displayed in the System pane.
6. Click Launch Browser (see
➤
Honeywell Video Systems
.
Figure 4-1) to go to the HNVE1 logon page.
.
➤ ➤
EQUIP Series IP