Using The Ptz Control To Pan, Tilt And Zoom (Ptz) The Dome; Figure 4-4 Example Of Ptz Dome Live View - Honeywell HNVE1 Reference Manual

Before You Begin Configuring

Using the PTZ Control to Pan, Tilt and Zoom (PTZ) the Dome

48
Figure 4-4 Example of PTZ Dome Live View
Note PTZ control requires the PTZ dome to be configured correctly for IntelliBus™
protocol.
The PTZ control is used to move (pan and tilt) the PTZ dome and control (zoom, focus, and
iris) the camera lens. For panning and tilting, click the black arrows in the center.
Using Your Mouse
Click on the live video dialog box and drag your mouse in the direction you want the camera
to move. If your mouse has a scroll wheel, use it to zoom in and out on the live image.
Select the PTZ speed (in
degrees per second). See
PTZ Settings on the Live
View Tab on page 49.
The PTZ control
takes the place of,
and provides the
same functionality
as, a traditional
keyboard controller.
Tours must be
configured in the
PTZ Dome Setup
view before they can
be run in Live View.