Installing The Honeywell Ip Utility And Web-Client Software; About The Honeywell Ip Utility And Web-Client; About The Honeywell Ip Utility - Honeywell HNVE1 Reference Manual

Installing the Honeywell IP Utility and
Web-Client Software

About the Honeywell IP Utility and Web-Client

About the Honeywell IP Utility

Document 800-04195 Rev B
11/09
The Honeywell IP Utility is used to provide the network connectivity for the network
camera system. The IP Utility automatically discovers Honeywell IP devices on the
network and enables you to configure the device settings. Using the IP Utility, you can
configure the IP network settings, name the cameras, upgrade the firmware on the
cameras, and change the user passwords of the device.
Note Before installing and using the Honeywell IP Utility, confirm that your network
camera is connected to the network through an Ethernet cable (see
RJ45 Ethernet Connection
This chapter covers:
• About the Honeywell IP Utility and Web-Client
• Administrator and Guest user profiles
• Confirming your system requirements
• Installing the Honeywell IP Utility software
• Logging onto the IP Utility and discovering network devices
• Connecting to a device and configuring network settings
• Launching the Web-Client to view live video
The Honeywell IP Utility is a software application that is installed from a CD or
downloaded from the Honeywell Systems Group website (www.honeywellvideo.com). It
is installed on a local workstation and is primarily used by Administrators to configure the
EQUIP Series of products residing on an IP network.
on page 20).
3
Network
27