Selecting from Two Installed Client Adapters
Selecting from Two Installed Client Adapters
If two client adapters are installed in your computer, follow the instructions below to specify the one for
which you want to set up profiles in ACU.
Double-click the Aironet Client Utility (ACU) icon on your desktop to open ACU. The Select A
Step 1
Wireless LAN Adapter Card screen appears (see
Note
Figure 3-1
Step 2
Select the card you wish to configure from the list of available cards and click OK.
Go to
Step 3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
3-24
The Select A Wireless LAN Adapter Card screen appears when you start ACU only if more than
one card is inserted in your computer or no cards are inserted but more than one card is installed.
Select A Wireless LAN Adapter Card Screen
Chapter 4
to create profiles for this card.
Chapter 3
Figure
3-1).
Installing the Client Adapter
OL-1394-04