Additional H.323 Services
•
•
•
•
•
•
•
•
•
•
•
•
•
Configurable Reboot of Cisco ATA
The Cisco ATA continuously monitors its Ethernet connection to the switch or hub. If this connection
is broken, the Cisco ATA starts an internal timer that runs until a configurable timeout period expires.
Once the timeout value is reached, the Cisco ATA automatically reboots. This timeout value is
configured by using the FeatureTimer2 configuration parameter. For more information, see the
"FeatureTimer2" section on page
Configuring Audio Packet Settings
Table 4-2
Table 4-2
Feature
Base port for receiving RTP packets
Class of Service (CoS) bit specification for signaling IP packets
RTP-packet size
Type of Service (ToS) bit specification for audio and signaling IP
packets
Configuring Billable Features
You can customize specific features on a subscription basis by changing the values of specific bits in
several different parameters.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
4-8
Configuring Hook Flash Timing, page 4-9
Configuring the Mixing of Call Waiting Tone and Audio, page 4-9
Configuring Network Ringback Tone, page 4-10
Configuring Reverse Audio Cut-Through Behavior, page 4-10
Configuring Supplementary Service Behavior and Parameters, page 4-10
Debugging Diagnostics, page 4-10
Hardware Information Display, page 4-10
Network Timing, page 4-11
Polarity Settings, page 4-11
Progress Tones, page 4-11
Selecting DTMF and Hookflash Transmission Methods, page 4-11
Selecting H.323 Connection and H.245 Transmission Methods, page 4-12
Setting Dial Plans, page 4-12
lists configurable audio-packet settings and their related configuration parameters.
Audio Packet Settings and Related Parameters
Table 4-3
5-31.
contains a list of billable features and their related parameters:
Chapter 4
Basic and Additional H.323 Services
Related Parameter
MediaPort, page 5-21
VLANSetting, page 5-12
NumTxFrames, page 5-25
TOS, page 5-26
OL-4804-01