Programmable Softkeys - Cisco SPA303 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Programmable Softkeys

The Cisco SPA300 Series and Cisco SPA500 Series IP Phones provide six
programmable softkeys (fields PSK 1 through PSK 6). These keys can be defined
by either a speed dial script or an XML service script.
To configure programmable softkeys:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
(Cisco SPA525G/525G2 only) Under Programmable Softkey Enable, choose yes.
To configure a speed dial script, enter the following in the PSK field:
extensionname
fnc=sd;ext=
fnc
where is the function of the key (speed dial), ext (
extension being dialed,
outbound call is sent, and
Vertical service activation codes (* codes) are supported in speed dial
configurations.
name
The field displays on the softkey on the phone display screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA30X or Cisco SPA50X
phone and 10 characters for a Cisco SPA525G/525G2 phone. If more characters
are used, the label can be truncated on the phone display.
To configure an XML script, enter the following in the PSK field:
scriptURL.xml
fnc=xml;url=http://
fnc
where is the function of the key (an XML script),
where the script is located, and
scriptname
The field displays on the softkey on the phone display screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA30X or Cisco 50X phone
and 10 characters for a Cisco SPA525G/525G2 phone. If more characters are used,
the label can be truncated on the phone display.
outboundextnum
@$PROXY;vid=
vid
is the extension on the calling phone from which the
name
is the name of the speed dial being configured.
scriptname
;nme=
scriptname is the name of the script.
name
;nme=
extensionname
) is the
scriptURL.xml
is the URL
3
67