Table of Contents
Advertisement
LEDs and Button
There are multiple LEDs and a Shutdown button designed for the panel, including
ON mains LED, ON PoE+ LED, ON Battery LED, Heartbeat LED, and so forth. You
can get the real-time system status according to the LEDs.
•
•
•
•
•
•
Figure 2-3
Check
Power Indicator
Check
Running Indicator
24
Power LEDs indicate which power is used to power up the panel.
Battery Charge LED indicates whether the battery is charged or not.
Running LED indicates whether the panel is powered up successfully and how
many doors are supported in the panel.
BLE LED indicates if the panel is ready to receive BLE signals from or is
connected with the Device Utility App
FACP LED indicates the panel's Door Access mode (Normal: fail secure, or
Reversed: fail safe) and if the FACP (Fire) input is triggered.
Shutdown Button is used to shut down the panel.
LEDs and Button
Shutdown
Button
2
ON PoE+
ON Mains
ON Battery
3
2Door
4Door
1
MPA2C3 Installation Guide
4
Check
BLE Indicator
Bluetooth
activated
5
Check
FACP Indicator
Reversed Door
Access Mode
(Fail Safe)
FACP (FIRE)
input activated/
triggered
Advertisement
Table of Contents
