Table of Contents
Advertisement
You will need to install a USB driver to support the connection. Follow these steps:
Warning: Do NOT connect the USB cable to the panel until AFTER the drivers are installed
1. Download the MPA2C3 USB driver from the link given in below table or scan the
https://honeywelldiscovertraining.com/login/discover/default.asp
2. Click
Figure 3-39 USB Driver InstallShield Wizard
108
specific QR code to access.
Install USB Drivers
wizard.
https://mywebtech.honeywell.com/Systems/Home
on the product menu to start the USB driver installation
MPA2C3 Installation Guide
Advertisement
Table of Contents
