Step 3.
Step 4.
Confirmation of Panel
Step 5.
4. Disconnect the edited reader used in last step
5. Connect rest of the readers (with wrong addresses) one at a time and follow
e.g. Readers R1 and R2 installed physically at a door 1 IN and door 1 OUT are
wrongly assigned as Door 1 OUT and Door 1 IN respectively.
1. Disconnect Reader R2
2. Edit Reader R1 and assign address Door 1, Reader IN
3. Disconnect Reader R1 and connect Reader R2
64
Select new function / address
Click Save
System displays new reader function as Online. Previous function is now
Offline
steps 3 and 4
MPA2C3 Installation Guide