Table of Contents
Advertisement
Mounting the Enclosure
Wiring the Panel – Metal Enclosure
1. Mount the panel into the metal housing and secure it with 4 M5 screws.
2.
Figure 4-3
Wiring to Power Supply and Tamper Connector – Metal Enclosure
Warning: Use a static strap whenever touching the panel to ensure protection from ESD
(Electrostatic Discharge).
Warning: Do not apply power at this time.
MPA2C3 Installation Guide
Metal housing and secure it with 4 M5 screws.
Installing the Panel
129
Advertisement
Table of Contents
