Table of Contents
Advertisement
Warranty and Service
Subject to the terms and conditions listed on the product warranty, during the war-
ranty period Honeywell will repair or replace, at its sole option, free of charge, any
defective products returned prepaid.
Be sure to have the model number, serial number, and the nature of the problem
available for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items
shipped to Honeywell without a clearly identified Return Merchandise Authoriza-
tion (RMA) number may be refused.
Safety Notes
Read the instructions carefully and thoroughly before installing the device and
putting it into operation.
They contain important information on installation, reprogramming and operation.
The device is a state-of-the-art product. Only use the device:
•
•
•
The manufacturer is not responsible for damage that is caused by use not in accor-
dance with regulations.
Installation and programming as well as maintenance and repair work may only be
carried out by skilled, authorized personnel.
De-energize the entire system before soldering and connecting.
Carry out soldering work with a temperature-controlled electrically isolated solder-
ing iron.
To avoid a short circuit with battery, Use isolated tools for installation and service.
Do not use the device in a potentially explosive environment or in rooms where
metal or plastic decomposing vapours are emitted.
ATTENTION! Important security notes to dangerous voltage operation
•
•
•
•
•
•
8
In accordance with regulations,
When it is has been installed and is functioning correctly,
In accordance with technical data
(Voltages >= 42,4 V peak value or >= 60 V DC, e.g. also 230 V AC).
Work on primary voltage should only be carried out by skilled, authorized personnel.
Only connect units as per IEC EN 62368-1 to the module.
Appropriate overload protection must be provided in the mains circuit.
For installation an appropriate mains separator is required.
Switch off the primary circuit before carrying out installation or maintenance
work.
Only cables with double insulation may be used. e.g. NYM, NYM, H05VV, H05RR
or similar cables.
MPA2C3 Installation Guide
Advertisement
Table of Contents
