Table of Contents
Advertisement
Figure 3-42 RS-485 Configuration via MPA2C3 Primary Panel
This configuration supports a total of 8 NetAXS-123 and/or MPA2C3 downstream
panels per Multidrop line.
Each MPA2C3 panel has a port for an Ethernet TCP/IP interface. The Ethernet TCP/
IP interface provides 10/100 MB Ethernet support for each panel.
Configuring FACP input functionality
FACP input functionality
The MPA2C3 has a dedicated fully hardware controlled FACP (Fire Alarm Control
Panel) input, intended to unlock all doors when triggered with the highest priority,
overriding any current access control setting.
When connected to a Fire system and there is a fire alarm, this function allows peo-
ple to easily evacuate a premises and allows first responders to easily enter
unlocked areas.
To make this function fully effective hardware AND software configuration need to
be made on the MPA2C3.
112
MPA2C3 Installation Guide
Advertisement
Table of Contents
