Honeywell MPA2C3 Installation Manual page 152

Access control unit
Hide thumbs Also See for MPA2C3:
Table of Contents

Advertisement

Max output current at Door1/AUX1 output when
OUT1, AUX1 jumper onboard "12V" is used
(wet contact)
Max output Voltage at Door2/AUX2 output
when OUT2, AUX2 jumper onboard "12V" is
used (wet contact)
Max output current at Door2/AUX2 output when
OUT2, AUX2 jumper onboard "12V" is used
(wet contact)
Relay contact min switching voltage and current
** Connect either RJ45 or push in terminal block; do not connect same Door output on both RJ45 and push in terminal
block.
Inputs
Supervised Input range
Digital input
Output Voltage Range at Input interface (12V) DrCnt Door 1-2, DrCnt
Max output current at input interfaces (12V)
RS485 BUS interfaces
Voltage range at RS485 busses
Max output current at RS485 bus I/O devices
Max output current at RS485 bus Downstream
146
OUT 1 @ RJ45 **,
AUX 1 @ RJ45 **
OUT 1 @ push in terminal
block**,
AUX 1 @ push in terminal
block**
OUT 2 @ RJ45 or
OUT 2 @ push in terminal
block**,
AUX 2 @ RJ45 or
AUX 2 @ push in terminal
block**
OUT 2 @ RJ45 **,
AUX 2 @ RJ45 **
OUT 2 @ push in terminal
block**,
AUX 2 @ push in terminal
block**
OUT 1-2, AUX1-2, Aux
Outputs 5-8
DrCnt Door 1-2, DrCnt
AUX1-2
Aux Inputs IN 9-16
Rex Door 1-2, Rex AUX1-2 Short circuit to GND default
AUX1-2
Rex Door 1-2, Rex AUX1-2
Aux Inputs IN 9-16
RS485 BUS I/O devices @
RJ45,
RS485 BUS I/O devices @
screw terminal block,
RS485 BUS Downstream @
RJ45
RS485 BUS I/O devices @
screw terminal block
RS485 BUS I/O devices @
RJ45
RS485 BUS Downstream @
RJ45
500mA per RJ45, limited to 750mA @
12VDC combined over both door output
contacts
750mA @ 12VDC combined over both
door output contacts
10VDC ~ 14VDC
500mA per RJ45, limited to 750mA @
12VDC combined over both door output
contacts
750mA @ 12VDC combined over both
door output contacts
1mA @ 5VDC
2k2Ohm +-10% default,
1k, 4k7, 10k Ohm selectable.(supervised
selectable)
(Unsupervised / digital selectable)
10VDC ~ 14VDC
500mA
10VDC ~ 14VDC
500mA in total for RS485 Modulbus
combined over RJ45 and screw terminal
block RJ45, limited to 500mA
500mA in total for RS485 Modulbus
combined over both RJ45
MPA2C3 Installation Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpa2c3-4

Table of Contents