Table of Contents
Advertisement
Output Contact type
Relay contact max switching voltage
and current
(dry contact)
Max output Voltage at Door 1/3
output when OUT1, OUT3 jumper
onboard "12V" is used (wet contact)
Max output current at Door 1/3
output when OUT1, OUT3 jumper
onboard "12V" is used (wet contact)
Max output Voltage at Door 2/4
output when OUT2, OUT4 jumper
onboard "12V" is used (wet contact)
Max output current at Door 2/4
output when OUT2, OUT4 jumper
onboard "12V" is used (wet contact)
Relay contact min switching voltage
and current
** Connect either RJ45 or push in terminal block; do not connect same Door output on both RJ45 and push in terminal
block.
Inputs
Supervised Input range
Digital input
MPA2C3 Installation Guide
OUT 1-4
Aux Outputs 5-8
OUT 1-4 @ RJ45
OUT 1-4 @ push in terminal
block**,
Aux Outputs 5-8
OUT 1 @ RJ45 or
OUT 1 @ push in terminal block**,
OUT 3 @ RJ45 or
OUT 3 @ push in terminal block**
OUT 1 @ RJ45 **,
OUT 3 @ RJ45 **
OUT 1 @ push in terminal block**,
OUT 3 @ push in terminal block**
OUT 2 @ RJ45 or
OUT 2 @ push in terminal block**,
OUT 4 @ RJ45 or
OUT 4 @ push in terminal block**
OUT 2 @ RJ45 **,
OUT 4 @ RJ45 **
OUT 2 @ push in terminal block**,
OUT 4 @ push in terminal block**
OUT 1-4, Aux Outputs 5-8
DrCnt Door 1-4,
Aux Inputs IN 9-16
Rex Door 1-4
Selectable per jumper OUT1-4: NO
(Normally Open) or NC (Normally Closed)
NO (Normally Open)
500mA @ 30VDC,
500mA @ 22VAC
3A @ 30VDC,
1A @ 22VAC
10VDC ~ 14VDC
500mA per RJ45, limited to 750mA @
12VDC combined over both door output
contacts
750mA @ 12VDC combined over both door
output contacts
10VDC ~ 14VDC
500mA per RJ45, limited to 750mA @
12VDC combined over both door output
contacts
750mA @ 12VDC combined over both door
output contacts
1mA @ 5VDC
2k2Ohm +-10% default,
1k, 4k7, 10k Ohm selectable. (supervised
selectable)
Short circuit to GND default
(Unsupervised / digital selectable)
149
Advertisement
Table of Contents
