Advertisement
[1] Basic specifications
Type:
Desktop
Copying system:
Dry-type electrostatic plain paper copier
Kinds of originals:
Sheets, book, three dimensional objects.
Original size:
10" x 14" (B4), maximum.
Copy size:
(Cassette and manual feed)
10" x 14" to 8%" x 5%" (B4 to A6) universal.
(Cassette feed)
10" x 14" to 8%" x 5%" (B4 to AS).
(Manual feed)
10" x 14" to 8%" x 5%" (B4 to A6).
Copy speed:
(Normal)
8%" x 11" to 8%" x 5%" (A4 to AS): 12 copies/minute
10" x 14" to 8%" (B4): 10 copies/minute
(When in enlargement and reduction)
10" x 14" to 8%" x 5%" (B4 to A5): 10 copies/minute
First copy:
8 seconds.
Warm-up time:
AO seconds
at rated voltage and room
temperature
of
more
than
68 degrees
Fahrenheit
(20 degrees centi-
grades) and relative humidity of 65%.
Multicopying:
1 to 99 copies, 10 key input, countdown type, repeat
and pause functions, and multicopy in the Pause mode.
Magnification ratio:
(Inch series)
1:2, 1:1.22, 1:1, 1:0.75, 1:0.64
(Metric series)
1:2, 1:1.22, 1:1, 1:080, 1:0.70
Exposure system:
Slit exposure with moving platen
Paper feed system:
Single
250-sheet
cassette
automatic
paper
feed and
manual paper feed.
Developing system:
Two component magnetic brush development.
Toner supply:
Automatic toner control system.
Photoconductor:
80¢ OPC drum
Cleaning system:
Blade cleaning
Paper separation system:
Separation sheet method.
Original alignment:
Front side aligned.
Paper transfer system:
Feed roller.
Charge system:
Negative dc corona.
Transfer system:
Negative dc corona.
|
SF-7200
Discharge system:
Positive dc corona and discharge lamp.
Light source:
Halogen lamp
100V series: 220W
110V series: 280W
120V series: 2230W
127V series: 280W -
200V series: 280W
Power requirements:
100VAC, 50/60Hz
110VAC, 50/60Hz
120VAC, 60Hz
127VAC, 60Hz
200VAC, 50Hz
220VAC, 50/60Hz
240V, 50Hz
Power consumption:
1.35kW
Fusing system:
Heat roller type
Upper heat roller: Teflon (R) (1150W)
Lower roller: Silicon
Physical dimensions:
530(W) x 490(D) x 345(H)mm
Weight:
About 44kg
Display functions:
Ready (print) indicator (green):
On when the copier is ready for copying.
Preheat indicator (red):
Flashes in the preheat mode.
Multicopy indicator (green):
Displays the number of copies to be made, normally
set to "0".
Displays
the total
copy
count
or the
number
of
copies already made.
Displays the location of a misfeed in the copier using
the silhouette figure.
Displays the status codes, and test command
num-
bers.
Repeat indicator (green):
On in the Repeat mode.
Pause indicator (green):
On in the pause mode.
Paper out indicator (red):
On when the cassette is not loaded or the cassette is
out of paper.
Toner indicator (red):
Flashes when the toner box is empty.
The
copier
stops
immediately
in the
single
copy
mode.
The copier stops after completing the copy number
currently in the multicopy mode.
Maintenance indicator (green): (Flashing Print Switch)
On when scheduled maintenance is required.
Developer indicator (red):
On when
the developer replacement period is reach-
ed.
Flashes when
the life of the developer
in the tank
expires (15,000 copies).
1-1
Advertisement
