Advertisement
SF-7200
(2) PF roller B
D Remove the PS plate spring.
@) Remove
the 2 E-rings on the front frame side of the
paper feed unit, DSW2 actuator, and bushing.
@) Remove
the screws that secure the gear and frame on
the rear frame side of the paper feed unit in reference
to the detailed
view, and remove
the frame
in the
arrow direction "A" along the frame, with care that the
PF roller A should not make contact with the PESW
holding bracket.
@ Remove the PF roller B in this condition.
Rear side
jl
;
fr
bracket
i'
f
|
X <
||
Remove
four screws
(3) PESW, PSS
@ Remove four screws that hold the PESW and PSS
holding bracket and move the lower side bracket to the
position
shown
in the figure.
Pay attention
when
moving the bracket to the area where the PS bracket
makes contact with the PS plate.
®
Remove the PESW locking paw! and remove the PESW.
(3) Remove two PSS securing screws and remove the PSS.
Rear side
PS plate
PESW
PSS
oe
'\ a\h
Bracket securing screw
PS bracket
PESW, PSS
\
holding brackét
Ne
-—<&
PSS securing screw
Gear, 31T
Bracket securing screw
Bracket securing screw
Advertisement
