Advertisement
SF-7200
g) Lift up the paper feed unit and remove
it from the
paper exit side of the copier.
Paper feed unit
View from the right side
3. Removing the Paper Feed Unit Major
Components
The paper unit must be removed from the copier prior to
this job.
(1) PF roller A assy
(D) Remove the PF solenoid and unlock the PF latch. The
PF solenoid
is secured to the solenoid holder with
latches at three locations.
@) Remove the E-ring to remove the stirring gear, 18T.
(8) Remove the C-ring that secures the PF clutch assembly
and remove the PF clutch unit.
@
Remove two E-rings that secure the PF roller A assy,
and remove the PF roller A assy. The PF roller rubber
may be replaced with a new one in this condition.
(BOTTOM)
PF solenoid
PF rolier rubber
PF rollerA
PF latch
E-ring
7S
—
C-ring
_ 2
Stirring gear, 18T
(TOP)
Advertisement
