Mount The Wall Mount Beam - Cisco Room Kit EQX Installation Manual

1. Mount the wall mount beam

The wall mounted Room Kit EQX system is mounted on a
beam that is fastened to the wall.
The beam must be level, and accurately centered about the
system's vertical center line.
Beam parts
(Box: A)
1x left carrier beam
1x right carrier beam
1x joining bracket
6x wall mount bracket 12x sliding nut
8x 12x
(M6x12, Hex 4 mm) (M6x8, Hex 4 mm)
You also need the number and type of screws that
are required for fastening the beam safely to the
wall (these screws are not provided by Cisco).
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
1.1. Assemble the wall mount beam
Connect the left and right carrier beam parts together using
the joining bracket and 8 screws
(M6x12, Hex 4 mm)
6
.
8x
Copyright © 2023 Cisco Systems, Inc. All rights reserved.