Mount The Left Screen - Cisco Room Kit EQX Installation Manual

20. Mount the left screen

Mount the brackets on the VESA holes on the back of the
screen. See the installation guide that follow the brackets for
more details than provided here.
Left screen
1x screen
1x left interface arm 1x right interface arm
(Box: Bracket 1) (Box: Bracket 1)
1x adjustable brace 2x
(Box: Bracket 1)
(M5x6)
(Box: Bracket 1)
A set of screws, spacers, and washers for fastening
the interface arms to the screen is provided. Use
the ones that suit your screen. If neither of the
screws and spacers fit your screen, the installer
must provide the required hardware.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
20.1. Attach the interface arms to the back of the screen
1. Carefully place the screen on a flat, even, soft surface
with the back facing upward. Take care not to make any
scratches on the screen. Follow guidelines given by the
screen vendor.
49
2. Attach the interface arms to the back of the screen; the
row of holes facing the screen edge. Ensure the same
holes are used on both arms.
The interface arms come with an interface kit, that is, a
set of screws and spacers; use the ones that suits your
screen. If neither of the screws and spacers fits your
screen, you must provide your own.
Copyright © 2023 Cisco Systems, Inc. All rights reserved.