Cisco Room Kit EQX Installation Manual page 13

2.5. Straighten up the frame
brackets
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
spacers
13
1. Adjust the four spacers (thumbscrews) until the frame
is plumb (perfectly straight up and down; no tilt). Use a
spirit level.
×4
2. Fasten the straightened up frame with one bracket
on each side. The installer must provide screws and
fasteners that suites your type of wall.
×2
When tightening the screw the bracket will intentionally
bend a bit, since the spacers (not these brackets)
determine the system's distance to the wall.
Copyright © 2023 Cisco Systems, Inc. All rights reserved.