About Cabling - Cisco Room Kit EQX Installation Manual

ABOUT CABLING

In the next mounting step you start connecting cables.
Here are some important notes for a correct, nice, and tidy
cabling.
Do not connect to power yet!
Do not connect any power cables to wall socket outlets
before step "23. Finish-up" on page 58.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
Cable routing
The colored areas in this illustration show the main areas for
cable routing. See more details on the next page.
In each step, we show the recommended route for that
specific cable; without explicitly showing which hole to
thread each and every cable through.
Organize cables neatly using velcro
We strongly recommend that you fasten the cables to the
steel structure with velcro straps . This is to avoid
(Box: B)
strain on cables and connectors, to avoid rattling noise, and
for a neat and tidy look.
The steel structure is equipped with many fastening points
for velcro straps.
The 3 nylon cable ties are for securing the camera
(Box: B)
cables in step 10.3.
15
Wiring diagram
A full wiring diagram is shipped with the product.
available online, at https://www.cisco.com/go/room-kit-eqx-
installation
The wiring diagram also gives some guidance how to route
the cables.
Cable marking
Each cable has a part number, which is printed on the cable.
The installation guide and wiring diagram refer to cables by a
label, for easy reference.
You'll find a table that maps the label to a part number in the
wiring diagram.
Where are the cables
The cables are in the accessory kit boxes
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
It is also
.
(Box: Acc 1, Acc 2)