Mount The Fan Module - Cisco Room Kit EQX Installation Manual

7. Mount the fan module

The fan module is placed above the bass. It contains two
identical fans.
Fan module
2x Fan (Box: Fans) 4x
(M4x8, Torx T20)
(Box: B)
1x Fan duct top (Box: Fans)
1x Fan duct bottom (Box: Fans)
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
7.1. Assemble the fan module
1. Rotate the fan so that the cable (F2) is facing backward
(see illustration), and slide the first fan onto the bottom
part of the fan duct.
F2
2. Rotate the second fan so that the cable (F1) is facing left
(see illustration), and slide the fan onto the bottom part of
the fan duct.
F1
24
3. Place the top part of the fan duct on top, and fasten it
with 4 screws .
(M4x8, Torx T20)
Make sure the cables (F1, F2) comes through the slot at
front without being pinched.
F2
F1
F2
F1
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
4x