12. Connect screen cables
HDMI cables for the screens:
•
Connect the left (S1) and right (S2) screen HDMI cables
to the codec.
•
Route the cables as shown, and leave the end for the
screen hanging freely. The cables will be connected to
the screens in
step
23.
Power cables for the screens:
•
Fasten the power cables for the left (S3) and right (S4)
screens to the corresponding side module with velcro
straps.
The best placement depend on your screens and the
position of your power outlets.
•
Use the regular cable routes when leading the cables
toward the wall socket outlets.
Don't connect them to the wall socket yet.
•
The cables will be connected to the screens in
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
step
23.
S1
S1
S2
S3
34
S4
S2
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
S1
S2