Cisco Room Kit EQX Installation Manual page 50

20.2. Connect the interface arms with the adjustable brace
1. Measure the horizontal distance between the interface
holes on your screen.
The adjustable brace supports distances ranging from
400 mm to 600 mm.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
2. Extend the brace and fix it at the desired length by
tightening the two screws.
Distance between
interface holes.
Notches show the fixing position for 400 mm, 500 mm,
and 600 mm distances.
Example: If the interface holes are
600 mm apart, extend the brace to
the notch marked with 600.
600
50
3. Place the brace between the interface arms and fasten it
with two screws .
(M5x6)
Copyright © 2023 Cisco Systems, Inc. All rights reserved.