9.2. Route the antenna cables and connect them to the codec
1. Route the antenna cables as shown in the illustration.
R3
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
R1
R1
R2
R3
29
2. Connect the antenna cables to the codec.
It's important to connect the correct antenna to the
correct connector on the codec.
For more details, see the full wiring diagram that were
shipped with the system. It's also available online.
R2
To Bluetooth
antenna
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
To vertical
Wi-Fi antenna
R1
To horizontal
Wi-Fi antenna
R2
R3