Mount The Power Strip And Psus - Cisco Room Kit EQX Installation Manual

4. Mount the power strip and PSUs

The power strip and PSUs are placed in the left side module,
close to the bottom.
Don't connect the power strip to the wall socket outlet now.
Power strip and PSUs
(Box: B)
1x Power strip 1x Power strip bracket
1x PSU, 12 V 1x PSU bracket
1x PSU, 24 V 7x
(M4x8, Torx T20)
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
4.1. Mount the power strip
Place the bracket over the power strip and fasten it to the
back plate with three screws
(M4x8, Torx T20)
From 12 V PSU (in step
From 24 V PSU (in step
Not in use (intentionally blocked by bracket)
From codec (in step 4.4)
To wall socket outlet (in
Downward
17
4.2. Mount the PSUs
1. Fasten the PSU bracket to the back plate with four
screws
(M4x8, Torx T20)
.
3x
2. Slide the two PSUs into the bracket. The smaller 12 V
PSU is above the larger 24 V PSU.
The cables that are fixed to the PSUs are to the right.
4.3)
4.3)
step 23)
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
.
4x