Connect Power And Network Cables - Cisco Room Kit EQX Installation Manual

13. Connect power and network cables

Connect amplifier to codec:
• Connect the cable between the amplifier and the codec
(D1). Route it as shown in the illustration.
Main network cable:
• Connect the network cable to the codec (E1). Use the
regular cable routes when leading the cable toward the
network wall socket.
Don't connect it to the wall socket yet.
Main power cable:
• Connect the cable to the power strip (E3). Use the regular
cable routes when leading the cable toward the network
wall socket.
Don't connect it to the wall socket yet.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
E3
35
D1
D1
E1
D1
E1
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
D1
E1