Mount The Right Screen - Cisco Room Kit EQX Installation Manual

21. Mount the right screen

Mount the brackets on the VESA holes on the back of the
screen. See the installation guide that follow the brackets for
more details than provided here.
Right screen
1x screen
1x left interface arm 1x right interface arm
(Box: Bracket 2) (Box: Bracket 2)
1x adjustable brace 2x
(Box: Bracket 2)
(M5x6)
(Box: Bracket 2)
A set of screws, spacers, and washers for fastening
the interface arms to the screen is provided. Use
the ones that suit your screen. If neither of the
screws and spacers fit your screen, the installer
must provide the required hardware.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
21.1. Attach the interface arms and adjust the rail position
Repeat the following steps for the right screen:
1. Step 20.1 — "Attach the interface arms to the back of the screen"
2. Step 20.2 — "Connect the interface arms with the adjustable brace"
3. Step 20.3 — "Adjust the VESA rail position".
Since the left and right screens are equal, the rail position should be the same as for the left screen.
54 Copyright © 2023 Cisco Systems, Inc. All rights reserved.