Table of Contents
Advertisement
14. Connect the microphones
The system needs external microphones. You may have ordered analog or digital microphones
from Cisco, or you may rely on a 3
party microphone solution.
rd
Analog microphones:
•
Lead the microphone cables from the table to the system using the regular cable routes.
Then connect them to the codec (MA1..3).
MA1..3
Toward
table
Microphones (optional)
(0..3)x
Table Microphone
Box: Acc 2)
You may have microphones from a 3
rd
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
MA1..3
(0..3)x
Table Microphone Pro
(Box: Table Mic Pro)
party vendor.
One digital microphone:
•
Lead the microphone cable from the table to the system using the regular cable routes.
Then connect it to the codec (MD1).
MD1
Toward
table
More than one digital microphone:
You must connect the microphones to the codec via an Ethernet switch (see the wiring diagram):
•
Place an Ethernet switch by the table and connect it to the codec (X1). Also connect the
switch to power (X2).
•
Connect the microphones to the switch (MD1..3).
X1
Toward
switch
36
MD1
X1
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
