Cisco Room Kit EQX Installation Manual page 11

2.3. Hang the side modules onto the beam
Repeat this for both side modules; the side modules are identical.
1. Observe the keyholes on the beam, and the large screw heads at
the back of the side module.
2. Hang these screws onto the beam keyholes.
Keyholes for the
left side module
Screw with large head,
for hanging the module
on the beam.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
Keyholes for the
right side module
Rear view of
side module
To avoid getting your fingers pinched between the modules,
lift a side module by holding your hands on the top and bottom
of the module; NOT on the side toward the center module.
11 Copyright © 2023 Cisco Systems, Inc. All rights reserved.