Cisco Room Kit EQX Installation Manual page 23

6.3. Add velcro straps to the lower tray
We recommend you add velcro straps to the center tray now,
because it's more difficult when the bass is in place.
You will us them to secure the cables that run underneath the
bass later in the installation process.
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
6.4. Insert the bass
1. Place the bass in the frame, and fasten with six screws
.
(M4x8, Torx T20)
6x
23
SB1
2. Connect the cable to the bass.
SB1.
SB1
Make sure that no cables are touching the bass. If they
do, they may cause rattling noise.
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
The cable is marked with