Mount The Covers - Cisco Room Kit EQX Installation Manual

16. Mount the covers

Covers
2x side cover (Box: A) 4x
2x top cover (left and right) (Box: A)
1x top cover (center) (Box: A)
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
16.1. Mount the side covers
Repeat on both sides.
1. Place the side cover as shown. Push it in and down at the
top first, then in at the bottom.
(M4x8, Torx T20)
(Box: A)
2. Fasten the cover with two screws
2x
1
2
.
(M4x8, Torx T20)
for each cover
38
16.2. Mount the top covers
Place the top covers as shown in the illustration. Left and
right first, then the center top cover. The covers shall rest on
the rubber grommets an both ends.
To avoid rattling noise, make sure the covers doesn't touch
any metal parts. Also, make sure not to interfere with the
antenna cables.
1
2
Copyright © 2023 Cisco Systems, Inc. All rights reserved.
1