User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
Default
Format
Mode
no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
Format
Mode
spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
Default
Format
Mode
no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
Format
Mode
show spanning-tree
This command displays spanning tree settings for the common and internal spanning tree, when
the optional parameter "brief" is not included in the command. The following details are
displayed.
Format
Mode
Switching Commands
disabled
spanning-tree port mode
Interface Config
no spanning-tree port mode
Interface Config
disabled
spanning-tree port mode all
Global Config
no spanning-tree port mode all
Global Config
show spanning-tree <brief>
Privileged EXEC
User EXEC
202-10102-01, May 2005
8-127