Spanning-Tree Mst Vlan; Spanning-Tree Port Mode; Spanning-Tree Port Mode All - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

5.1.15 spanning-tree mst vlan

This command adds an association between a multiple spanning tree instance and a VLAN
so that the VLAN is no longer associated with the common and internal spanning tree.
The parameter
spanning tree instance. The
Format
Mode
5.1.15.1 no spanning-tree mst vlan
This command removes an association between a multiple spanning tree instance and a
VLAN so that the VLAN is again be associated with the common and internal spanning
tree. The parameter
spanning tree instance. The
Format
Mode

5.1.16 spanning-tree port mode

This command sets the Administrative Switch Port State for this port to enabled.
Default
Format
Mode
5.1.16.1 no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
Format
Mode

5.1.17 spanning-tree port mode all

This command sets the Administrative Switch Port State for all ports to enabled.
Default
Format
Mode
Spanning Tree Protocol Commands
is a number that corresponds to the desired existing multiple
<mstid>
<vlanid>
spanning-tree mst vlan <mstid> <vlanid>
Global Config
is a number that corresponds to the desired existing multiple
<mstid>
<vlanid>
no spanning-tree mst vlan <mstid> <vlanid>
Global Config
disabled
spanning-tree port mode
Interface Config
no spanning-tree port mode
Interface Config
disabled
spanning-tree port mode all
Global Config
v1.0, February 2007
corresponds to an existing VLAN ID.
corresponds to an existing VLAN ID.
5-9