User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
show port-security
This command displays the port-security settings for the entire system.
Format
Mode
Admin Mode
show port-security
This command displays the port-security settings for a particular interface or all interfaces.
Format
Mode
Interface Admin Mode
Dynamic Limit
Static Limit
Violation Trap Mode
show port-security dynamic
This command displays the dynamically locked MAC addresses for port.
Format
Mode
MAC Address
show port-security static
This command displays the statically locked MAC addresses for port.
Format
Mode
MAC Address
9-4
show port-security
Privileged EXEC
Port Locking mode for the entire system
show port-security <interface | all>
Privileged EXEC
Port Locking mode for the Interface.
Maximum dynamically allocated MAC Addresses.
Maximum statically allocated MAC Addresses.
Whether violation traps are enabled.
show port-security dynamic <interface>
Privileged EXEC
MAC Address of dynamically locked MAC.
show port-security static <interface>
Privileged EXEC
MAC Address of statically locked MAC.
202-10102-01, May 2005
Security Commands