User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Server IP Address
Server Type
Server Stratum
Server Reference ID
Server Mode
Server Max Entries
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address
Address Type
Priority
Version
Port
Last Attempt Time
Last Attempt Status
Total Unicast Requests
Failed Unicast Requests
User Account Commands
These commands manage user accounts. The commands are divided into two functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
disconnect
This command closes a telnet session.
Format
Switching Commands
IP Address of configured SNTP Server
Address Type of Server.
Claimed stratum of the server for the last received valid packet.
Reference clock identifier of the server for the last received valid
packet.
SNTP Server mode.
Total number of SNTP Servers allowed.
IP Address of configured SNTP Server.
Address Type of configured SNTP server.
IP priority type of the configured server.
SNTP Version number of the server. The protocol version used to query
the server in unicast mode.
Server Port Number
Last server attempt time for the specified server.
Last server attempt status for the server.
Number of requests to the server.
Number of failed requests from server.
disconnect {<sessionID> | all}
202-10102-01, May 2005
8-77