Users Name; No Users Name; Users Passwd - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
SNMPv3 Authentication
SNMPv3 Encryption

users name

This command adds a new user (account) if space permits. The account <username> can be up to
eight characters in length. The name may be comprised of alphanumeric characters as well as the
dash ('-') and underscore ('_'). The <username> is not case-sensitive.
Six user names can be defined.
Format
Mode

no users name

This command removes an operator.
Format
Mode
Note:

users passwd

This command is used to change a password. The password should not be more than eight
alphanumeric characters in length. If a user is authorized for authentication or encryption is
enabled, the password must be at least eight alphanumeric characters in length. The username and
password are not case-sensitive. When a password is changed, a prompt will ask for the former
password. If none, press enter.
Default
Format
Mode
Switching Commands
ters on the system. If the value is set to
will only be able to retrieve parameter information. The SNMPv3
access mode may be different than the CLI and Web access mode.
This field displays the authentication protocol to be used for the speci-
fied login user.
This field displays the encryption protocol to be used for the specified
login user.
users name <username
Global Config
no users name <username>
Global Config
The 'admin' user account cannot be deleted.
no password
users passwd <username>
Global Config
202-10102-01, May 2005
ReadOnly,
>
the SNMPv3 user
8-79