No Option; Show Ip Dhcp Binding; Show Ip Dhcp Global Configuration - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Example :a3:4f:22:0c / a3 4f 22 0c / a34f.220c.9fed The <address> specifies an IP address.
Default
Format
Mode

no option

This command removes the options.
Format
Mode

show ip dhcp binding

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
Modes
IP address
Hardware Address
Lease expiration
Type

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
Modes
Service DHCP
Switching Commands
none
option <code> {ascii string | hex <string1>
[<string2>...<string8> ] | ip <address1>
[<address2>...<address8> ]}
DHCP Pool Config
no option <code>
DHCP Pool Config
show ip dhcp binding [address]
Privileged EXEC
User EXEC
The IP address of the client.
The MAC Address or the client identifier.
The lease expiration time of the IP Address assigned to the client.
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
Privileged EXEC
User EXEC
The field to display the status of dhcp protocol.
202-10102-01, May 2005
8-91