Network Mac-Type; No Network Mac-Type; Network Parms; Network Protocol - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

network mac-type

This command specifies whether the burned in MAC address or the locally-administered MAC
address is used.
Default
Format
Mode

no network mac-type

This command resets the value of MAC address to its default.
Format
Mode

network parms

This command sets the IP Address, subnet mask and gateway of the router. The IP Address and the
gateway must be on the same subnet.
Format
Mode

network protocol

This command specifies the network configuration protocol to be used. If you modify this value
change is effective immediately. The parameter
requests to a Bootstrap Protocol (BootP) server or a dhcp server until a response is received.
indicates that the switch should be manually configured with IP information.
Default
Format
Mode
Switching Commands
Privileged EXEC
burnedin
network mac-type {local | burnedin}
Privileged EXEC
no network mac-type
Privileged EXEC
network parms <ipaddr> <netmask> [<gateway>]
Privileged EXEC
bootp
none
network protocol {none | bootp | dhcp}
Privileged EXEC
202-10102-01, May 2005
indicates that the switch periodically sends
none
8-19