User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode
clear traplog
This command clears the trap log.
Format
Mode
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
Mode
logout
This command closes the current telnet connection or resets the current serial connection.
Note:
Save configuration changes before logging out.
Format
Mode
ping
This command checks if another computer is on the network and listens for connections. To use
this command, configure the switch for network (in-band) connection. The source and target
devices must have the ping utility enabled and running on top of TCP/IP. The switch can be pinged
from any IP workstation with which the switch is connected through the default VLAN (VLAN 1),
as long as there is a physical path between the switch and the workstation. The terminal interface
sends, three pings to the target station.
Format
Modes
8-62
Privileged EXEC
clear traplog
Privileged EXEC
clear vlan
Privileged EXEC
logout
Privileged EXEC
ping <ipaddr>
Privileged EXEC
User EXEC
202-10102-01, May 2005
Switching Commands