Radius Server Timeout; No Radius Server Timeout; Show Radius - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Format
Mode

radius server timeout

This command sets the timeout value (in seconds) after which a request must be retransmitted to
the RADIUS server if no response is received. The timeout value is an integer in the range of 1 to
30.
Default
Format
Mode

no radius server timeout

This command sets the timeout value to the default value.
Format
Mode

show radius

This command is used to display the various RADIUS configuration items for the switch as well as
the configured RADIUS servers. If the optional token 'servers' is not included, the following
RADIUS configuration items will be displayed.
Format
Mode
Primary Server IP Address
Number of configured servers
Max number of retransmits
Timeout Duration
Accounting Mode
If the optional token 'servers' is included, the following information regarding the configured
RADIUS servers is displayed.
9-20
no radius server retransmit
Global Config
5
radius server timeout <seconds>
Global Config
no radius server timeout
Global Config
show radius [servers]
Privileged EXEC
Indicates the configured server currently in use for authentication
The configured IP address of the authentication server
The configured value of the maximum number of times a request
packet is retransmitted
The configured timeout value, in seconds, for request re-transmissions
Yes or No
202-10102-01, May 2005
Security Commands