Class-Map; No Class-Map; Class-Map Rename - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Note: Once a class match criterion is created for a class, it cannot be changed or deleted. To
change or delete a class match criterion, the entire class must be deleted and re-created.
The CLI command root is

class-map

This command defines a DiffServ class of type match-all. When used without any match
condition, this command enters the class-map mode. The <
alphanumeric string from 1 to 31 characters uniquely identifying an existing DiffServ class.
Note: The class-map-name 'default' is reserved and must not be used.
The class type of
match-all
packet to be considered a member of the class.
Note: The CLI mode is changed to Class-Map Config when this command is successfully
executed.
Format
Mode

no class-map

This command eliminates an existing DiffServ class. The <
existing DiffServ class ( The class name 'default' is reserved and is not allowed here). This
command may be issued at any time; if the class is currently referenced by one or more policies or
by any other class, the delete action fails.
Format
Mode

class-map rename

This command changes the name of a DiffServ class. The
existing DiffServ class. The
string from 1 to 31 characters uniquely identifying the class (The class-map-name 'default' is
reserved and must not be used here).
Default
Quality of Service (QoS) Commands
.
class-map
indicates all of the individual match conditions must be true for a
class-map match-all <class-map-name>
Global Config
no class-map <class-map-name>
Global Config
new-class-map-name
<
none
202-10102-01, May 2005
class-map-name
class-map-name
class-map-name
<
parameter is a case-sensitive alphanumeric
>
> is a case sensitive
> is the name of an
is the name of an
>
10-11