Serial Baudrate; No Serial Baudrate; Serial Timeout; No Serial Timeout - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

serial baudrate

This command specifies the communication rate of the terminal interface. The supported rates are
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default
Format
Mode

no serial baudrate

This command sets the communication rate of the terminal interface.
Format
Mode

serial timeout

This command specifies the maximum connect time (in minutes) without console activity. A value
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default
Format
Mode

no serial timeout

This command sets the maximum connect time (in minutes) without console activity.
Format
Mode

set prompt

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Format
Mode
Switching Commands
9600
serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200}
Line Config
no serial baudrate
Line Config
5
serial timeout <0-160>
Line Config
no serial timeout
Line Config
set prompt <prompt string>
Privileged EXEC
202-10102-01, May 2005
8-21