User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Active Ports
show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
Modes
Logical slot/port
Lag Name
Link State
Admin Mode
Link Trap Mode
STP Mode
Mbr Ports
Port Speed
Type
Active Ports
show port-channel summary
This command displays the static capability of all LAGs on the device as well as a summary of
individual LAGs.
Switching Commands
This field lists the ports that are actively participating in this port-chan-
nel.
show port-channel {<logical slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
The name of this port-channel (LAG). You may enter any string of up to
15 alphanumeric characters.
Indicates whether the Link is up or down.
May be enabled or disabled. The factory default is enabled.
This object determines whether or not to send a trap when link status
changes. The factory default is enabled.
The Spanning Tree Protocol Administrative Mode associated with the
port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
A listing of the ports that are members of this port-channel (LAG), in
slot/port notation. There can be a maximum of eight ports assigned to a
given port-channel (LAG).
Speed of the port-channel port.
This field displays the status designating whether a particular port-chan-
nel (LAG) is statically or dynamically maintained.
Static - The port-channel is statically maintained.
Dynamic - The port-channel is dynamically maintained.
This field lists the ports that are actively participating in the port-chan-
nel (LAG).
202-10102-01, May 2005
8-117