NETGEAR ProSafe GSM7248 User Manual page 186

Layer 2 managed switch software version 4
Hide thumbs Also See for ProSafe GSM7248:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Bridge Priority
Bridge Identifier
Time Since Topology Change
Topology Change Count
Topology Change
Designated Root
Root Path Cost
Root Port Identifier
Root Port Max Age
Root Port Bridge Forward Delay
Hello Time Configured value of the parameter for the CST.
Bridge Hold Time
Bridge Max Hops
CST Regional Root
Regional Root Path Cost
Associated FIDs List of forwarding database identifiers currently associated
with this instance.
Associated VLANs
When the "brief" optional parameter is included, this command displays spanning tree settings for
the bridge. In this case, the following details are displayed.
Bridge Priority
Bridge Identifier
Bridge Max Age
8-128
Specifies the bridge priority for the Common and Internal Spanning tree
(CST). The value lies between 0 and 61440. It is displayed in multiples
of 4096.
The bridge identifier for the CST. It is made up using the bridge priority
and the base MAC address of the bridge.
Time in seconds.
Number of times changed.
Boolean value of the Topology Change parameter for the switch indicating if a
topology change is in progress on any port assigned to the common and internal
spanning tree.
The bridge identifier of the root bridge. It is made up from the bridge priority
and the base MAC address of the bridge.
Value of the Root Path Cost parameter for the common and internal spanning
tree.
Identifier of the port to access the Designated Root for the CST.
Derived value.
Derived value.
Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs)
Bridge max-hops count for the device.
Bridge Identifier of the CST Regional Root. It is made up using the
bridge priority and the base MAC address of the bridge.
Path Cost to the CST Regional Root.
List of VLAN IDs currently associated with this instance.
Configured value.
The bridge identifier for the selected MST instance. It is made up using
the bridge priority and the base MAC address of the bridge.
Configured value.
202-10102-01, May 2005
Switching Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents