No Mtu; Network Javamode; No Network Javamode; Network Mac-Address - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Mode

no mtu

This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.
Format
Mode
Interface Config

network javamode

This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Default
Format
Mode

no network javamode

This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
Format
Mode

network mac-address

This command sets locally administered MAC addresses. The following rules apply:
• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered
(b'0') or locally administered (b'1').
• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual
address (b'0') or a group address (b'1').
• The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
8-18
Interface Config
no mtu
enabled
network javamode
Privileged EXEC
no network javamode
Privileged EXEC
network mac-address <macaddr>
202-10102-01, May 2005
Switching Commands