Spanning-Tree Mst Instance; No Spanning-Tree Mst Instance; Spanning-Tree Mst Priority - NETGEAR ProSafe GSM7248 User Manual

Layer 2 managed switch software version 4
Hide thumbs Also See for ProSafe GSM7248:
Table of Contents

Advertisement

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
If the 'cost' token is specified, this command sets the path cost for this port within a multiple
spanning tree instance or the common and internal spanning tree instance, depending on the
<mstid> parameter, to the default value, i.e. a pathcost value based on the Link Speed.
If the 'external-cost' token is specified, this command sets the external path cost for this port for
mst '0' instance, to the default value, i.e. a pathcost value based on the Link Speed.
If the 'port-priority' token is specified, this command sets the priority for this port within a specific
multiple spanning tree instance or the common and internal spanning tree instance, depending on
the <mstid> parameter, to the default value, i.e. 128.
Format
Mode

spanning-tree mst instance

This command adds a multiple spanning tree instance to the switch. The instance <mstid> is a
number within a range of 1 to 4094, that corresponds to the new instance ID to be added. The
maximum number of multiple instances supported by is 4.
Format
Mode

no spanning-tree mst instance

This command removes a multiple spanning tree instance from the switch and reallocates all
VLANs allocated to the deleted instance to the common and internal spanning tree. The instance
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance to be
removed.
Format
Mode

spanning-tree mst priority

This command sets the bridge priority for a specific multiple spanning tree instance. The instance
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The
priority value is a number within a range of 0 to 61440 in increments of 4096.
Switching Commands
no spanning-tree mst <mstid> <cost | external-cost |
port-priority>
Interface Config
spanning-tree mst instance <mstid>
Global Config
no spanning-tree mst instance <mstid>
Global Config
202-10102-01, May 2005
8-125

Advertisement

Table of Contents
loading

This manual is also suitable for:

7200 series

Table of Contents